T-Max® Manager G2™
Control up to 60 tanning units with push-button ease. Use the Manager G2™ as a stand-alone front desk controller, or connect it to your salon cumputer for even more functionality.
Simple control of up to 60 beds
The T-Max® Manager G2™ is a front desk control unit for all tanning beds and tanning units. Connect to up to 60 tanning units to a single Manager G2™, regardless of the manufacturer. The Manager G2™ works seamlessly with tanning beds containing T-Max® Certified Timers, or simply connect a T-Max® 3W/G2 to each bed that does not have a T-Max® Certified Timer installed.
The display consists of 10 two-digit LED displays along the top of the T-Max® Manager G2™ with a Start/Stop and Set button below each display for manual control. A Horizontal row of 6 LEDs indicates which bank of ten beds are being displayed. The T-Max® Manager G2™ can be used manually or controlled with a PC using today’s most popular tanning software.
To have control from multiple locations within your salon, up to eight T-Max® Manager G2™s and/or T-Max® Manager Touches can be connected in a single installation.
The T-Max® Manager G2™ can also connect to our G2™ Access Point, allowing you to control your salon without the need to run cables throughout your salon. For more information on the G2™ Access Point, click here.
5″H x 10″W x 2″D
20 7-Segment LED displays showing times and status of 10 units at a time
6 LEDs show which tanning units are being displayed
Computer: RS-232 protocol, DB9F w/6′ Cable
Wired: RJ-22 Connection
Wireless: RJ-11 Connection to connect the G2™ Access Point
Power: 2.1mm Connector
ADNET 2K Utility Program
5MBytes Hard Disk Drive Space
Windows® 98, NT, 2000, XP, 8,10 and 11