T-Max® G2™ Wireless Adapter
The G2™ wireless adapters eliminate running cables between the front desk and all the tanning beds. Save setup time and money by going wireless.
Ditch the wires
The G2™ Wireless Adapters allow you to control your salon without running cables from room to room. Utilizing a 900MHz RF signal to communicate, the wireless signal can reach up to 300 feet.
G2™ Access Point
The working end of the G2™ Wireless Adapter is the G2™ Access Point. Connected to any T-Max® timer or Manager, The Access Point transmits and receives the communication signals. Simply connect one G2™ Access Point to your T-Max® Manager (G2™ or Touch) and a G2™ Access Point to each 3W/G2™ or wireless-ready tanning bed timer and you’re all set. You will not need to run cables throughout your salon.
G2™ Power Injector
The G2™ Power Injector connects to any T-Max® Timer that is not wireless ready, allowing you to wirelessly communicate with any T-Max® timer that has ever been manufactured. Simply connect a G2™ Access Point to a G2™ Power Injector, then connect the G2™ Power Injector to the T-Max® timer or T-Max® Manager/Pro. The G2™ Power Injector allows older salons to enjoy wireless control.
Easy expansion
With the G2™ Wireless Adapters, you can easily add more tanning beds to your salon without worrying about communication cables. Simply connect a G2™ Wireless module to each new bed and you’re in business.
If your salon is currently “daisy-chained” to your T-Max® Manager, you can still add more units without running communication cables. Just connect a G2™ Wireless Adapter to the last timer in your daisy-chain, then connect G2™ Wireless adapters to each new tanning unit. The T-Max® Manager will communicate through the current daisy-chain to the G2™ Wireless Adapter at the end of the line, then to the new timers with the G2™ Wireless Adapters. Expanding your salon has never been easier!
Effortless upgrades
Do you currently use an older timer system that needs to be replaced but dread re-wiring? Now, converting your salon from an old home-run wired system to T-Max® could not be easier. Connect a T-Max® 3W/G2™ and a G2™ Access Point to your existing rooms, connect a G2™ Wireless Adapter to your new T-Max® Manager/Pro, G2™ or Touch, and you have converted your old, outdated timing system to a new T-Max® Series… all without re-wiring your salon!
Common connection scenarios
- T-Max® Manager Touch / G2™, T-Max® 3W/G2™ — Connect directly to G2™ Wireless Access Point
- T-Max® Certified tanning bed timers with RJ-45 port — Connect directly to G2™ Wireless Access Point
- T-Max® Certified tanning bed timers without RJ-45 port — Power Injector required to connect to G2™ Wireless Access Point
- Non-T-Max® Certified tanning bed timers — T-Max® 3W/G2™ required to connect to G2™ Wireless Access Point
- Older T-Max® Managers, 3As, 1As, etc. — Power Injector required to connect to G2™ Wireless Access Point
T-Max® G2™ Access Point Specifications
Dimensions
6” (15.2cm) x 2” (5.1cm) x 1.5” (3.8cm)
Indicators
4 LED
Communication
900MHz RF
Connection
RJ-11
Power Injector Specifications
Dimensions
4” (10.2cm) x 2.5” (6.4cm) x 1.25” (3.2cm)
Power
9-12V DC or AC @ 50mA
Indicator
Power On LED
Connection
1 x RJ22 to T-Max® Timer
1 x RJ11 to G2™ Access Point
2.1mm Power
